STEP 1

Profile: ByteIT
Service profile: IETF
Default access point: Select your wifi or gprs access point
Public user name: sip: your_userID@sip.bablio.com<your_userid>
Use compression: No
Registration: When Needed
Use security: No

STEP 2

Proxy server
Proxy server address: sip:sip.bablio.com
Realm: sip.bablio.com
User name: your_userID 
Password: your account password
Allow loose routing: Yes
Transport type: UDP
Port: 5060

STEP 3

Registrar server
Registrar serv.addr.: sip:sip.bablio.com
Realm: sip.bablio.com
User name: your_userID
Password: your account password
Transport type: UDP
Port: 5060

STEP 4

Make calls!

 

Step 1: Accessing your unit

  • Connect your phone into the PHONE port of your Linksys ATA.
  • Dial **** then 110#, the SPA-3102 will announce the current IP address
  • Once you have the IP address of your SPA-3102 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA-3102> For example: http://192.168.1.10

Step 2: Access LINE 1

 

  • Go to Voice > Admin Login > Advanced
  • Click the URL
  • If a username and password login appears enter username "admin", and your SIP password.
  • If you decide to lock down the user side of the SPA-3102, the username is "user"

Step 3: Proxy and Registration

  • Go to LINE 1
  • NAT Mapping Enable: yes
  • NAT Keep Alive Enable: yes
  • Go to the Proxy and registration heading
  • For SIP proxy enter: sip.bablio.com
  • OB Proxy: sip.bablio.com.au
  • Enter your Display Name: John Doe
  • For USER ID: enter your VoIP USER ID
  • For the password field, enter the SIP password which was given to you: ( i.e 8174dBGFs )
  • For AUTH ID: enter your VoIP USER ID and set to ENABLE

 

 

Step 4: Proxy and Registration

  • Change the preferred codec to G729a or G711a
  • Disable silent suppression and select low silence threshold for better quality calls
  • Copy and paste the following dial plan:

 

Step 5:

Go to SIP Page and you will see to settings please make them the same as below:

  • Handle VIA received: yes
  • Handle VIA rport: yes
  • Insert VIA received: yes
  • Insert VIA rport: yes
  • Substitute VIA Addr: yes
  • Send Resp To Src Port: yes
  • Use STUN: yes
  • STUN Server: stun1.bablio.com
  • Submit all changes by clicking the submit button.

 

fring™ is a free mobile VoIP software that lets you talk and live chat (IM) using your handset's Internet connection instead of costly mobile airtime (GSM) minutes. fring enables free mobile calls over Wi-Fi Internet access or your GPRS, EDGE or 3G Internet data plan.
fring lets you easily communicate with all your VoIP and regular phone contacts from one, integrated contact list. fring also supports hundreds of SIP-based services and even from non-SIP enabled handsets, enabling cheap local and international VoIP calls to contacts’ PCs, mobile phones and landline numbers. fring is also enhanced with real-time contact availability (presence) so you can see who’s available before dialing.
All you need to use fring is a 3G handset with Internet connectivity that is already available from your mobile service provider or through your nearest Wi-Fi hotspot. fring does not require any proprietary hardware or airtime, and works with phones purchased through any mobile operator. fring can be simply downloaded into your handset via SMS received from another fringster™ or from fring's website download page.

STEP 1

This configuration guide assumes that you have already signed up and downloaded the application from www.fring.com

You can find the installation guide here.

STEP 2

 

  1. Start Fring
  2. Select “Menu then choose “Add-Ons”
  3. From the 'Add-ons' screen choose 'SIP'.

STEP 3

 

 

  1. In the User-ID box, enter your account number.
  2. In the SIP Password box, enter your password.
  3. In the: proxy server address box, enter sip.bablio.com
  4. Click Login.

 

 

You are logged into your account and should now be able to make outgoing calls through Byte IT Solutions.

STEP 4

Make Calls

Step 1:

You must first determine what IP address it received.
To do this, on the phone dial pad, press the "envelope" button and then press the button under the LCD screen word "save". The IP address displayed will look like numbers with full stops in the middle. (e.g. 10.1.2.34 or 192.13.4.21) write this number down.

Step 2:

Open your web browser.

Step 3:

Enter the address: http://IPADDRESS in your browser, replacing the word "IPADDRESS" with the number you wrote down in step 1. E.g: http://10.1.2.3

Step 4:

Click on the "Admin Login" button near the top right side of the screen, then click on the "Ext 1" tab.

Step 5:

You need to modify only a few parameters from the factory default. They are listed here:

 

  • NAT Mapping Enable: yes
  • NAT Keep Alive Enable: yes
  • SIP Port: 5060
  • Proxy: sip.bablio.com
  • Register Expires: 1800
  • User ID: Your VoIP USER ID
  • Password: Your VoIP PASSWORD
  • Preferred Codec: G729a

 

 

Step 6:

Go back to the top of the page and click on the "SIP" tab.

Step 7:

Scroll to RTP Parameters:

 

  • RTP Packet Size: 20

 

 

Step 8:

Scroll down the page and you will see to settings please make them the same as below:

 

  • Handle VIA received: yes
  • Handle VIA rport: yes
  • Insert VIA received: yes
  • Insert VIA rport: yes
  • Substitute VIA Addr: yes
  • Send Resp To Src Port: yes
  • Use STUN: yes
  • STUN Server: stun1.bablo.com

 

 

Step 9:

Now scroll down to the very bottom of the page and Click Save Settings and wait for device to Reboot

Step 10:

Your device should now be connected to make calls

The Linksys SPA8000 8-Port IP Telephony Device is a full featured Analog Terminal Adapter (ATA) for small business enterprises providing enhanced communication services via a broadband connection to the Internet.

The SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multi-port RJ-21 50-pin connector offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100Base-T RJ-45 Ethernet interface to connect to either a router or multi-layer switch.

 


STEP 1

Connect one end of the Ethernet cable (included) to the ETHERNET port of the SPA8000. Connect the other end to your Cable/DSL modem. Connect one end of a different Ethernet cable to the AUX port of the SPA8000. Connect the other end to the Ethernet port (network card) of your PC. Power on the cable/DSL modem and then power on the SPA8000.

STEP 2

Make sure your PC is setup to obtain an IP address automatically. This will allow your PC to obtain an IP address from your SPA 8000. You will generall get a IP address with default gateway 192.168.0.1

STEP 3

Open your internet browser and type the following: http://192.168.0.1 (or whatever you recevied as the default gateway) and press enter.
Enter “admin” for the user and “admin” for the password.

STEP 4

A setup page will appear. Click on “WAN Setup”.

 

Choose the Internet connection type depending on how your ISP assigns you your Internet Protocol (IP) number. When you have finished your settings, click on “Submit Changes”. When your Router Setup screen comes back up, you should be able to browse the Internet from your PC. If not, contact your ISP.

STEP 5

Choose from the main menu “VOICE” and then “L1”.

 

Enter your Byte IT Solutions Virtual Number into the User Id field and the sip password into the Password field.

Repeat step 5 for L2 – L8.

STEP 6

For the best voice quality, choose codec G729 and then select AVT for the DTMF method

STEP 7

Submit all changes

STEP 8

Make Calls